Qingdao Huashida Machinery Co., Ltd.  

Product Name: PE Plastic Pipe Manufacturing Device Vacuum Calibrating Model NO.: PE-655/1372 Computerized: Computerized Automation: Automatic Exhaust: Don't Exhaust Screw Channel Structure: Deep Screw Screw: Single-Screw Assembly Structure: Separate Type Extruder Feeding Mode: One Feed Product Type: Extrusion Molding Machine Plastic Processed: PE Type: Pipe Extruder Application: for Producing Pre-Insulated Pipe Jacket Pipe Diameter: From 655-1372 Raw Material: PE Trademark: HSD Transport Package: Standard Package Specification: Pe-655/1372 Origin: Qingdao China HS Code: 8477209000 Product Description Plastic Pipe Manufacturing Machine (Dim655mm-1372mm)---Pipe diameter range: 110-600mm,655-1372mm, 960-1680mm---The extrusion line comprise equipments and devices as below, 1set Vacuum loader 1set Hopper dryer 1set High-effeciency single screw extruder 1set single screw extruder for mark line 1set Vacuum calibration table 1set Water spraying tank 1 set Hauling machine 1set Cutting machine 1set StackerI. Pipe Usage---HDPE jacket pipe is out case of thermal insulating pipe, which is widely used in central heating, oil, nature gas and other industrial area.II. Machine Advantages---High-efficiency extruder gives larger output, stable performance.For exampleSJ-75/33---250-350kg/hSJ120/33---700-900kg/hSJ150/33---800-1200kg/h---Compared with inflating method (internal pressure method)1. For 24 hours working, it reduces 2-3 workers for each shift.2. There is much waste pipe and material, no need workers to crush waste material.3. High-effeciency. Take Dimater 960mm as an example, Output is approximately 60 pcs of 11.6meters pipe, it is much higher output than that of inflating method.4. Pipe wall is average and smooth, to reduce waste of raw material, and pipe thickness is adjustable.5. No need trim edge, once forming.III. Main machine- High-effeciency single screw extruder---Single screw is with barreir & mixing head; barrel is new model with slotting (channel), Both make security of good jellification, large output and stable performance.IV. Controlling systemThe complete line could be controlled by PLC, with good human-machine interface, all technical parameters could be set and indicated by touching screen. Controlling system is designed according to the customer;s requirement, to be with PLC, or without. V. Electrical system---ABB frequency converter or EUROTHERM speed controller---Japan RKC temperature controller--- SIEMENS AC contactorsStylePE-110/600PE-655/1372PE-960/1680Main extruderSJ-75/33SJ-120/33SJ-150/33Pipe diameterΦ110-600mmΦ 650-1372 mmΦ 960-1680mmCapacity250-350kg/h700~900 kg/h800-1200kg/hInstalled power160kw440 kw580kwLength28m32 m48m